Novell NETWARE 6-DOCUMENTATION Manual page 3599

110: The overlay file name_RUN.OVL is the wrong version for this utility.
Source:
Possible Cause:
Action:
114: The system called GetError, but the specified procedure has been deleted.
Source:
Possible Cause:
Action:
Possible Cause:
Action:
180: The system called GetListIndex with element name, but that element is not found
in the currently selected list.
Source:
Possible Cause:
Action:
181: AlignChangedList was called with the element name, but that element was not
found in the currently selected list.
Source:
Possible Cause:
Action:
182: AlignListDisplay was called with the element name, but that element was not
found in the currently selected list.
Source:
Possible Cause:
Action:
648 System Messages
utility name in message prefix
An outdated version of the Help file is in the search path.
Replace the outdated file with a current version.
utility name in message prefix
The most likely cause of this problem is an outdated or corrupted version of
the error file TEXUTIL.IDX.
Get a new version of the error file.
Another possibility is hardware problems.
If the problem persists, check the hardware and cabling. If the problem
persists, contact a Novell support provider.
utility name in message prefix
The list processing functions are out of sync. This error is usually caused by a
program logic problem.
Contact a Novell support provider.
utility name in message prefix
The list processing functions are out of sync. This error is usually caused by
an internal program logic error.
Contact a Novell support provider.
utility name in message prefix
The list processing functions are out of sync. This error is usually caused by
an internal program logic error.
Contact a Novell support provider.