Novell NETWARE 6-DOCUMENTATION Manual page 3348

NWCONFIG-X-288: A recoverable initialization problem occurred with parameter
value. You may continue anyway.
Source:
Explanation:
Action:
NWCONFIG-X-289: Value value is not in the list of acceptable values.
Source:
Explanation:
Action:
NWCONFIG-X-290: Value value is not within the range specified for this parameter.
Source:
Explanation:
Action:
NWCONFIG-X-293: Driver name did not unload correctly. Control will be switched to
the system console screen where you may see the error.
Source:
Explanation:
Action:
NWCONFIG-X-297: Driver name was successfully unloaded. Press Enter to continue.
Source:
Explanation:
Action:
NWCONFIG.NLM
The value supplied for a parameter caused a problem, but NWCONFIG was
able to recover from the error.
None. This message is for information only. NWCONFIG was able to recover
from the error.
NWCONFIG.NLM
An invalid value was entered.
Enter an acceptable value.
NWCONFIG.NLM
An invalid value was entered.
Enter an acceptable value.
NWCONFIG.NLM
NWCONFIG was unable to determine the cause of the failure to unload.
Switch to the system console screen, where a message will be displayed by the
NetWare server indicating the reason the driver did not unload. Correct the
problem indicated by the server, and retry the operation.
NWCONFIG.NLM
This alert is for information only.
None. This message is for information only.
NWCONFIG Messages 397