Novell NETWARE 6-DOCUMENTATION Manual page 3181

LOGIN-X-200: The MAP command cannot change local drives.
Source:
Explanation:
Possible Cause:
Explanation:
Action:
LOGIN-X-210: This server is being used to read login scripts. You cannot log out.
Source:
Explanation:
Action:
LOGIN-X-215: An internal system error occurred during LOGIN's attempt to
canonicalize the context: (name).
Source:
Explanation:
Action:
LOGIN-X-220: Script file name cannot be included.
Source:
Explanation:
Possible Cause:
Possible Cause:
Action:
230 System Messages
LOGIN.EXE
Local drives cannot be changed to or from search drives by using MAP.
A MAP CHANGE command was issued within the login script that
referenced a local drive.
Do not try to change local drives using MAP.
LOGIN.EXE
LOGIN encountered a LOGOUT command in a login script. LOGIN makes
sure you were trying to log out of the same server that it was using to read the
login script. If that has happened, various errors could occur; for example, the
workstation could hang, or output could be unintelligible.
Determine which login script was being read and the server on which it
resides. Do not try to log out of that server.
LOGIN.EXE
LOGIN tried to expand the relative name to a full name.
Try again. If the problem persists, contact a Novell support provider.
LOGIN.EXE
The login script had a include script file name entry, and LOGIN was unable
to include it.
No script file exists.
The specified path or filename is wrong.
Make sure that the path and filename specified are correct.