Novell NETWARE 6-DOCUMENTATION Manual page 3430

PSERVER-X-89: The print server is already attached to too many NetWare servers and
cannot attach to NetWare server name.
Source:
Possible Cause:
Action:
PSERVER-X-90: NetWare server name is unknown at this time.
Source:
Possible Cause:
Action:
Possible Cause:
Action:
Possible Cause:
Action:
PSERVER-X-91: The NetWare server's bindery is locked. You cannot attach to
NetWare server name at this time.
Source:
Possible Cause:
Action:
PSERVER-X-92: You cannot attach to NetWare server name because it has no more
connections available.
Source:
Possible Cause:
Action:
PSERVER.NLM
A print server queue can be serviced by up to 25 print servers. Twenty-five
servers are already attached and servicing this queue.
If the print server needs to service this queue, detach one of the other print
servers from the queue.
PSERVER.NLM
The uesr might have mistyped the name of the server,
Make sure to type the name of the server correctly.
The user specified a server that is not on the network.
List all the servers that the workstation can recognize by using NLIST.
The user specified a server that is down for maintenance.
If the server is down for maintenance, try the command when the server is
back up.
PSERVER.NLM
The network supervisor locked the bindery for maintenance. Usually this
situation is only temporary.
Try the command when the server is back up.
PSERVER.NLM
The print server needs one connection slot to run. All 100 connection slots are
in use.
Wait until a connection slot becomes available. Or, you can use MONITOR to
clear a connection.
PSERVER Messages 479