Novell NETWARE 6-DOCUMENTATION Manual page 3379

NWCONFIG-X-484: Warning: NWCONFIG has detected that no disk mirroring has
been configured. This is allowable, but not recommended, because disk mirroring is
an important part of full mirrored-server fault tolerance.
Source:
Explanation:
Action:
NWCONFIG-X-485: Warning: Some problems still exist with disk mirroring. Mirror
status description: description. These problems must be resolved before completing
the installation.
Source:
Explanation:
Action:
NWCONFIG-X-486: NWCONFIG.NLM tried to load the NLM_name to enable serve- to-
server communication but failed to do so for some unknown reason. It is not possible
now to copy files from a NetWare server.
Source:
Explanation:
Action:
NWCONFIG-X-488: For the installation to continue, the current version of ICMD.NLM
is required to be loaded. NWCONFIG.NLM could not find a copy of the ICMD.NLM in
any of the NetWare boot partitions created, or the copies of the ICMD.NLM found in
the NetWare boot partitions were corrupted and hence not loadable. Installation
cannot continue.
Source:
Explanation:
Action:
428 System Messages
NWCONFIG.NLM
Disk mirroring is an important part of full mirrored-server fault tolerance.
Before continuing with NWCONFIG, establish disk mirroring.
NWCONFIG.NLM
Some problems still exist with disk mirroring.
Make sure the correct disk driver is loaded. Retry creating disk mirroring. If
the problem persists, contact a Novell support provider.
NWCONFIG.NLM
Server-to-server communication, necessary for file copy, is not possible
unless the NLM indicated in the message is loaded.
Try to determine from the console screen why the indicated NLM did not load.
If possible, fix the problem. Otherwise, contact a Novell support provider.
NWCONFIG.NLM
The ICMD NLM must be loaded to continue the installation.
Contact a Novell support provider.