Novell NETWARE 6-DOCUMENTATION Manual page 3362

NWCONFIG-X-365: The Directory ID cannot be removed from volume name.
Source:
Explanation:
Action:
NWCONFIG-X-366: A virtual device does not have a mirror set that can be displayed
or modified.
Source:
Explanation:
Action:
NWCONFIG-X-389: An NCP Server object (or an unknown object) with name name
already exists at context context.
Source:
Explanation:
Action:
NWCONFIG-X-392: The program cannot allocate a semaphore.
Source:
Explanation:
Action:
NWCONFIG-X-393: The attempt to log in to server name by user username failed.
Error: number
Source:
Action:
NWCONFIG.NLM
An internal error occurred which prevented clearing of an ID field on the
volume. Perhaps the volume is read-only.
Contact a Novell support provider.
NWCONFIG.NLM
An attempt was made to view the set of mirrored devices corresponding to a
virtual device. A virtual device is a device that does not use standard NetWare
device partitioning, mirroring, and Hot Fix. The device is registered with
NetWare as a logical partition only.
Do not attempt to view the mirrored set, etc. corresponding to this device.
NWCONFIG.NLM
All objects of the same type must have unique names within a directory tree
context. There is an existing Server object with the same name and in the same
context as one that is being added.
Change the context or name of the new or existing Server object.
NWCONFIG.NLM
This error is probably caused by insufficient memory.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
NWCONFIG.NLM
Check the conditions listed in the message and verify that all are correct. To
review information for the error code number, see Error Codes in the online
documentation.
Freeing Server Memory
Guide.
NWCONFIG Messages 411