Novell NETWARE 6-DOCUMENTATION Manual page 3638

TIMESYNC-X-60: Cannot parse load command line arguments.
Source:
Explanation:
Possible Cause:
Action:
Possible Cause:
Action:
TIMESYNC-X-61: Cannot initialize global information.
Source:
Possible Cause:
Action:
TIMESYNC-X-62: Cannot hook TimeSync NCP verb.
Source:
Explanation:
Action:
Possible Cause:
Action:
TIMESYNC-X-63: Couldn't allocate main stack.
Source:
Possible Cause:
Action:
TIMESYNC.NLM
One of the following probably accounts for this error:
The syntax in the command line is invalid possibly due to typos or use of
illegal characters.
Make sure the syntax in your command line is valid.
The server does not have enough memory available.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
TIMESYNC.NLM
The server does not have enough memory available.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
TIMESYNC.NLM
The TIMESYNC program cannot get a resource. Someone or another program
is already running a version of TIMESYNC.NLM that is interfering with the
current NLM program running.
Find out who or what is running the interfering NLM program and unload it
The server does not have enough memory available.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
TIMESYNC.NLM
The server does not have enough memory available.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
Freeing Server Memory
Guide.
TIMESYNC Messages 687