Novell NETWARE 6-DOCUMENTATION Manual page 3499

SERVER-X-982: Insufficient memory for Command Process Resource tags.
Source:
Possible Cause:
Action:
SERVER-X-983: Error allocating semaphores for Command Line Services
Source:
Possible Cause:
Action:
SERVER-X-992: Command file processor unable to allocate work buffer.
Source:
Possible Cause:
Action:
SERVER-X-993: Command file processor unable to allocate work buffer.
Source:
Action:
SERVER-X-996: Too many input parameters passed to Command File processor.
Source:
Explanation:
Action:
SERVER-X-997: Invalid line in command file - line length exceeds number characters.
Source:
Possible Cause:
Action:
548 System Messages
SERVER.EXE
The server is low on contiguous memory.
Add more memory or unload unnecessary NLM programs.
SERVER.EXE
Server is extremely low on memory.
Add more memory.
SERVER.EXE
The server is running out of Alloc Short Term memory and cannot allocate
enough of this type of memory to process command files.
Increase the memory available to the server. See
Temporarily in the Server Operating System Administration
SERVER.EXE
See message "SERVER-X-992: Command file processor unable to allocate
work buffer." on page 548
SERVER.EXE
An .ncf file was passed more than 32 parameters.
Reduce the required parameters to 32 or fewer.
SERVER.EXE
A line in an .NCF file is too long.
Make sure no trailing information comes after the commands in .NCF files.
Edit the file if necessary. For more information, see
in the Server Operating System Administration
processed should be a command (DOS) text file.)
Freeing Server Memory
Guide.
Using Server Batch Files
Guide. (The file being