Novell NETWARE 6-DOCUMENTATION Manual page 2710

UNLOAD
Purpose
Syntax
272 Utilities Reference
Use at the server console to
Unload a module that was previously loaded with the LOAD command
Unload outdated NLM
loaded
You can also use UNLOAD at workstations running Novell
software for client modules that have been previously linked with LOAD.
UNLOAD NLM_name
UNLOAD ADDRESS SPACE=address_space [NLM_name]
UNLOAD KILL ADDRESS SPACE=address_space
Parameter
NLM_name
ADDRESS SPACE=
address_space
ADDRESS SPACE=
address_space NLM_name
KILL ADDRESS SPACE=
address_space
IMPORTANT:
Before you unload a module, be sure to read the next section,
"Unloading Modules."
programs so that updated modules can be
TM
Use to
Specify the module you want to unload.
Specify the address space you want to unload.
This command unloads all modules from the
address space, removes the space, and
returns its resources to the system.
Specify the module you want to remove from
the designated address space. This command
unloads the specified module from the address
space, but does not remove the address
space.
Remove the specified address space, but
without unloading modules from it first. Use this
command only if you know the address space
can't be unloaded any other way.
®
Client
TM