Novell NETWARE 6-DOCUMENTATION Manual page 2687

Parameter
TTS UnWritten Cache Wait Time =
time
TTS Backout File Truncation Wait
Time = time
Additional Information
Use to
Specify how long a block of transactional data can be held in
memory.
Supported values: 11 seconds to 10 minutes 59.1 seconds
Default: 1 minute 5.9 seconds
Some blocks of transactional data wait for other transactional
blocks to be written first.
If one of these blocks reaches its maximum time limit, other write
requests are held up and this block is written to disk.
Specify how long allocated blocks remain available for the TTS
backout file when these blocks are not in use.
Supported values: 1 minute 5.9 seconds to 1 day 2 hours 21
minutes 51.3 seconds
Default: 59 minutes 19.2 seconds
Topic
Using NetWare Remote
Manager to set server
parameters
Using MONITOR to set
server parameters
Improving server
performance
Editing .NCF files
Time synchronization and
the TIMESYNC.CFG file
See
Server Parameters option in the
Remote Manager Administration Guide
Server Parameters option in
Server Operating System Administration
Guide > Optimizing the NetWare Server
Server Operating System Administration
Guide
Network Time Management Administration
Guide
NetWare
MONITOR
Utilities 249