Novell NETWARE 6-DOCUMENTATION Manual page 2617

SCRSAVER
Purpose
Syntax
Topic
Storage device drivers
Determine the operating
status of a storage device
Mounting and dismounting a
CD-ROM device
Use to lock the server console and to activate a screen saver for the console
display.
NOTE:
The screen saver and the console-locking features were formerly part of
MONITOR. Separating them from monitor.nlm allows the new utility to protect the
console by using the stronger security of eDirectory authentication.
SCRSAVER [option][;option][;option] [...]
When SCRSAVER is loaded, you can use any of the following command
options as console commands.
Command options
(no parameters)
ACTIVATE
See
Drivers for Host Adapters and Storage Devices
Activating and Deactivating a Hard Disk
Managing Removable Media Devices
Use to
Default to SCRSAVER AUTO CLEAR DELAY=60;
DELAY=600; ENABLE; ENABLE AUTO CLEAR;
ENABLE LOCK.
Override the delay interval and activate the screen
saver immediately.
ACTIVATE also overrides both DISABLE and
ENABLE modes. This means that if you enter
ACTIVATE when the screen saver has been
disabled, the DISABLE mode is changed to ENABLE
so that the screen saver can appear.
Utilities 179