Novell NETWARE 6-DOCUMENTATION Manual page 2614

SCAN ALL
Purpose
Syntax
Using SCAN ALL
176 Utilities Reference
Use at the server console to scan all LUNs of all SCSI adapters in the server
or all LUNs associated with a designated SCSI adapter.
IMPORTANT:
SCAN ALL forces a scan and takes an order of magnitude longer
to execute than SCAN FOR NEW DEVICES does. SCAN ALL should be used only
when you know that there is an undetected device on a LUN other than LUN0.
SCAN ALL An
Parameter
(no parameter)
An
Several utilities perform much the same operation, but they each differ in
some respects.
LIST STORAGE ADAPTERS displays a list of registered storage
adapters and the devices they drive. The information is read from the
Media Manager database.
LIST DEVICES forces a scan for devices , displays the return list of
storage devices, and registers any new devices with the Media Manager
database. This command does not simply read the database.
Use to
Scan all LUNs of all SCSI adapters in the server.
Specify the SCSI adapter you want to scan.
Find the An number by entering the LIST STORAGE
ADAPTERS command at the console. The An number is
enclosed in square brackets to the left of the storage
adapter name, for example:
[V312-A0] ADAPTEC PCI Host Adapter Module
To scan all LUNs associated with the adapter in the
example, you would enter:
SCAN ALL A0