Novell NETWARE 6-DOCUMENTATION Manual page 2618

180 Utilities Reference
Command options
AUTO CLEAR DELAY Set the number of seconds to wait before clearing the
DELAY
DISABLE
DISABLE AUTO
CLEAR
DISABLE LOCK
ENABLE
ENABLE AUTO
CLEAR
ENABLE LOCK
HELP
NO PASSWORD
STATUS
Use to
unlock dialog box. The range is 1 to 300 and the
default is 60, or one minute.
Set the number of seconds to wait before activating
the screen saver. The range is 1 to 7000 and the
default is 600, or 10 minutes.
Disable the screen saver, thereby preventing it from
activating and saving the console display.
Disable the automatic clearing of the unlock dialog
box. When this command is executed, the unlock
dialog box remains on the screen until it is cleared by
user input.
Disable the console lock. When the locking feature is
disabled, you can retrieve the console display without
a username or password simply by pressing any key.
Enable the screen saver. When enabled, the screen
saver displays after the keyboard has been inactive
for the number of seconds specified in the DELAY
command option.
Enable the automatic clearing of the unlock dialog
box after the number of seconds of keyboard
inactivity specified in the AUTO CLEAR DELAY
command option
Enable the console locking feature. When enabled,
the screen saver requires the username and
password before restoring the console display. The
user object must have appropriate rights
Display information about command options and
their use.
Unlock the console without requiring a password in
the event that eDirectory becomes unavailable.
You must set this option when you load SCRSAVER.
Otherwise, the console cannot be unlocked when
eDirectory is unavailable.
Display the current status of screen saver features
and command options.