Passive-Interface (Ipv6 Ripng) - Allied Telesis IE340 Series Command Reference Manual

RIP IP 6 C
NG FOR V OMMANDS
- (IP 6 RIP
PASSIVE INTERFACE V NG

passive-interface (IPv6 RIPng)

Overview Use this command to enable suppression of routing updates on an interface.
Use the no variant of this command to disable this function.
Syntax passive-interface <interface>
no passive-interface <interface>
Default Disabled
Mode Router Configuration
Examples To suppress routing updates on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
To stop suppressing routing updates on vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-router)#
C613-50631-01 Rev A
)
Parameter Description
<interface>
The interface to suppress routing updates on.
configure terminal
router ipv6 rip
configure terminal
router ipv6 rip
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
passive-interface vlan2
no passive-interface vlan2
1089