I
C
NTERFACE
OMMANDS
(
)
DESCRIPTION
INTERFACE
description (interface)
Overview
Use this command to add a description to a specific port or interface.
description <description>
Syntax
Mode
Interface Configuration
Example
The following example uses this command to describe the device that an interface
is connected to.
awplus#
awplus(config)#
awplus(config-if)#
Command
Version 5.4.7-1.1: valid character set changed to printable ASCII characters
changes
C613-50631-01 Rev A
Parameter
Description
<description>
Text describing the specific interface. Descriptions can contain any
printable ASCII characters (ASCII 32-126).
configure terminal
interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
description Boardroom PC
500