Maximum-Area - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS
-
MAXIMUM AREA

maximum-area

Overview Use this command to set the maximum number of OSPF areas.
Use the no variant of this command to set the maximum number of OSPF areas to
the default.
Syntax maximum-area <1-4294967294>
no maximum-area
Default The default for the maximum number of OSPF areas is 4294967294.
Mode Router Configuration
Usage notes Use this command in router OSPF mode to specify the maximum number of OSPF
areas.
Examples The following example sets the maximum number of OSPF areas to 2:
awplus#
awplus(config)#
awplus(config-router)#
The following example removes the maximum number of OSPF areas and resets to
default:
awplus#
awplus(config)#
awplus(config-router)#
C613-50631-01 Rev A
Parameter Description
<1-4294967294> Specify the maximum number of OSPF areas.
configure terminal
router ospf 100
configure terminal
router ospf 100
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
maximum-area 2
no maximum-area
1156