OSPF C
OMMANDS
CAPABILITY OPAQUE
capability opaque
Overview
This command enables opaque-LSAs. Opaque-LSAs are Type 9, 10 and 11 LSAs that
deliver information used by external applications.
Use the no variant of this command to disable opaque-LSAs.
Syntax
capability opaque
no capability opaque
Default
By default, opaque-LSAs are enabled.
Mode
Router Configuration
awplus#
Example
awplus(config)#
awplus(config-router)#
C613-50631-01 Rev A
configure terminal
router ospf 100
no capability opaque
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1119