Show Interface Switchport Vlan Translation - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS

SHOW INTERFACE SWITCHPORT VLAN TRANSLATION

show interface switchport vlan translation
Overview Use this command to display VLAN translation information for some or all
interfaces.
show interface switchport vlan translation [interface <int>]
Syntax
Mode User Exec and Privileged Exec
Example To display VLAN translation information for port1.0.1, use the command:
awplus#
port1.0.1
Output Figure 16-2: Example output from show interface switchport vlan translation
Output Figure 16-3: Example output from show interface switchport vlan translation
C613-50631-01 Rev A
Parameter
interface <int>
show interface switchport vlan translation interface
interface port1.0.1
awplus#show interface switchport vlan translation interface
port1.0.1

VLAN on Wire
=================
200
default
awplus#show interface switchport vlan translation

Interface: port1.0.1
VLAN on Wire
=================
200
default

Interface: port1.0.2
VLAN on Wire
=================
69
default
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The interface to display information about. An interface can
be a switch port (e.g. port1.0.4), a static channel group (e.g.
sa2) or a dynamic (LACP) channel group (e.g. po2).
VLAN
=================
100
accept
VLAN
=================
100
accept
VLAN
=================
1
accept
Outer Vlan 
=================
300
Outer Vlan
=================
300
Outer Vlan
=================
647