Show Power-Inline Interface - Allied Telesis IE340 Series Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE INTERFACE

show power-inline interface

Overview This command displays a summary of Power over Ethernet (PoE) information for
specified ports. If no ports are specified then PoE information is displayed for all
ports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show power-inline interface [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display the PoE port-specific information for all PoE ports on the switch, use the
following command:
awplus#
To display the PoE port specific information for port1.0.5 to port1.0.7, use the
following command:
awplus#
Output Figure 20-4: Example output from show power-inline interface
awplus#show power-inline interface
Interface Admin
port1.0.5 Enabled
port1.0.6 Enabled
port1.0.7 Enabled
port1.0.8 Enabled
port1.0.9 Enabled
port1.0.10 Enabled
port1.0.11 Enabled
port1.0.12 Enabled
port1.0.13 Enabled
C613-50631-01 Rev A
Parameter Description
<port-list>
Enter the PoE port(s) to display PoE specific information in the show
output.
show power-inline interface
show power-inline interface port1.0.5-port1.0.7
Pri Oper Power Device
(mW)
Low Off
Low Off
Low Off
Low Off
Low Off
Low Off
Low Off
Low Powered 1800 n/a
Low Off
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Class Max
0 n/a
0 n/a
0 n/a
0 n/a
0 n/a
0 n/a
0 n/a
0 n/a
"Getting Started
Guide.
(mW)
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
n/a n/a
0 15400 [C]
n/a n/a
832