Show Debugging Alarm - Allied Telesis IE340 Series Command Reference Manual

A M C
LARM ONITORING OMMANDS

SHOW DEBUGGING ALARM

show debugging alarm
Overview Use this command to see what debugging is turned on for Alarm Monitoring.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show debugging alarm
Mode User Exec and Privileged Exec
Example To show the status of Alarm Monitoring debugging, use the command:
awplus#
Output Figure 14-3: Example output from show debugging alarm
Related debug alarm
commands
C613-50631-01 Rev A
show debugging alarm
awplus#show debugging alarm

% Alarm debugging is disabled
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
557