Log Host Exclude - Allied Telesis IE340 Series Command Reference Manual

L C
OGGING OMMANDS

LOG HOST EXCLUDE

log host exclude
Overview Use this command to prevent specified log messages from being sent to the
remote syslog server, when
basis of:
•
•
•
•
•
Use the no variant of this command to stop excluding the specified messages.
log host {<hostname>|<ipv4-addr>|<ipv6-addr>} exclude [level
Syntax
<level>] [program <program-name>] [facility <facility>]
[msgtext <text-string>]
no log host {<hostname>|<ipv4-addr>|<ipv6-addr>} exclude [level
<level>] [program <program-name>] [facility <facility>]
[msgtext <text-string>]
Parameter Description
<hostname>
The host name of a remote syslog server.
<ipv4-addr>
The IPv4 address of a remote syslog server, in A.B.C.D format.
<ipv6-addr>
The IPv6 address of a remote syslog server, in X:X::X:X format.
level
Exclude messages of the specified severity level.
<level>
The severity level to exclude. The level can be specified as one of the following numbers or
level names, where 0 is the highest severity and 7 is the lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Exclude messages from a specified program.
<program-
The name of a program. You can enter either one of the following predefined program
name>
names (depending on your device model), or another program name that you find in the log
output. The pre-defined names are not case sensitive but other program names from the log
output are.
C613-50631-01 Rev A
log host
the priority/severity of the message
the program that generated the message
the logging facility used
a sub-string within the message, or
a combination of some or all of these.
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
is enabled. You can exclude messages on the
461