Show Ip Irdp - Allied Telesis IE340 Series Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

SHOW IP IRDP

show ip irdp
Overview This command displays whether IRDP is globally enabled on your device, and the
status of the debugging modes.
If the debug ip irdp command has been set with the detail parameter then the
both parameter is also set and the output will show "packet debugging mode is
all".
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip irdp
Syntax
Mode User Exec and Privileged Exec
Example To display global IRDP configuration, use the command:
awplus#
Output Figure 22-9: Example output from the show ip irdp command
Figure 22-10: Example output from the show ip irdp command with debug ip
Figure 22-11: Example output from the show ip irdp command with debug ip
Related debug ip irdp
commands
router ip irdp
C613-50631-01 Rev A
C
OMMANDS
show ip irdp
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is disabled
irdp detail set
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is all
irdp both set
IRDP is enabled
event debugging is disabled
nsm debugging is disabled
packet debugging mode is both
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
915