Passive-Interface (Rip) - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS
- (RIP)
PASSIVE INTERFACE

passive-interface (RIP)

Overview Use this command to block RIP broadcasts on the interface.
Use the no variant of this command to disable this function.
Syntax passive-interface <interface>
no passive-interface <interface>
Default Disabled
Mode RIP Router Configuration
Example Use the following commands to block RIP broadcasts on vlan2:
awplus#
awplus(config)#
awplus(config-router)#
Related show ip rip
commands
C613-50631-01 Rev A
Parameter Description
<interface>
Specifies the interface name.
configure terminal
router rip
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
passive-interface vlan2
1055