Ip Irdp Address Preference - Allied Telesis IE340 Series Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

IP IRDP ADDRESS PREFERENCE

ip irdp address preference
Overview When multiple routers connected to a LAN are all sending Router Discovery
advertisements, hosts need to be able to choose the best router to use. Therefore
the IRDP defines a preference value to place in the Router Discovery
advertisements. Hosts choose the router with the highest preference value.
This command sets the preference value to include in Router Discovery
advertisements sent for the specified IP address.
The no variant of this command sets the preference for a specific address to the
default of 0.
ip irdp address <ip-address> preference <0-2147483647>
Syntax
no ip irdp address <ip-address> preference
Default The default preference value is 0.
Mode Interface Configuration for a VLAN interface or a local loopback interface.
To set the preference value to 3000 for the address 192.168.1.1 advertised on
Examples
vlan5, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
To set the preference value to the default of 0 for the address 192.168.1.1
advertised on vlan5, use the following commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip irdp
commands
ip irdp preference
show ip irdp interface
C613-50631-01 Rev A
C
OMMANDS
Parameter
<ip-address>
<0-2147483647>
configure terminal
interface vlan5
configure terminal
interface vlan5
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The IP address to be advertised with the specified preference
value.
The preference value advertised. A higher number increases
the preference level for this address.
ip irdp address 192.168.1.1 preference 3000
no ip irdp address 192.168.1.1 preference
887