Allied Telesis IE340 Series Command Reference Manual page 1037

RIP C
OMMANDS
-
IP RIP AUTHENTICATION KEY CHAIN
5)
awplus(config-if)#
Example 1 To use the key chain named 'mykey' on the interface vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Example 2 In the following example of a configuration for multiple keys authentication, a
password 'toyota' is set for key 1 in key chain 'cars'. Authentication is enabled on
vlan2 and the authentication mode is set to MD5:
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
awplus(config-keychain-key)#
2021 duration 43200
awplus(config-keychain-key)#
duration 43200
awplus(config-keychain-key)#
awplus(config-keychain)#
awplus(config)#
awplus(config-if)#
awplus(config-if)#
Related accept-lifetime
commands
send-lifetime
ip rip authentication mode
ip rip authentication string
key
key chain
C613-50631-01 Rev A
Specify the mode of authentication for the given interface (text or MD5),
using the following command:
ip rip authentication mode {md5|text}
configure terminal
interface vlan2
ip rip authentication key-chain mykey
configure terminal
key chain cars
interface vlan2
ip rip authentication key-chain cars
ip rip authentication mode md5
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
key 1
key-string toyota
accept-lifetime 10:00:00 Oct 08
send-lifetime 10:00:00 Oct 08 2021
exit
exit
1037