Ripng For Ipv6 Commands; Introduction - Allied Telesis IE340 Series Command Reference Manual

27

Introduction

Overview This chapter contains RIPng commands. RIPng (Routing Information Protocol next
generation) is an extension of RIPv2 to support IPv6. RFC 2080 specifies RIPng. The
differences between RIPv2 and RIPng are:
•
•
•
For more information, see the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50631-01 Rev A
RIPng does not support RIP updates authentication
RIPng does not allow the attachment of arbitrary tags to routes
RIPng requires the encoding of the next-hop for a set of routes
"aggregate-address (IPv6
"clear ipv6 rip route" on page 1076
"debug ipv6 rip" on page 1077
"default-information originate (IPv6
"default-metric (IPv6 RIPng)" on page 1079
"distribute-list (IPv6 RIPng)" on page 1080
"ipv6 prefix-list" on page 1081
"ipv6 rip metric-offset" on page 1083
"ipv6 rip split-horizon" on page 1085
"ipv6 router rip" on page 1086
"neighbor (IPv6 RIPng)" on page 1087
"offset-list (IPv6 RIPng)" on page 1088
"passive-interface (IPv6
"recv-buffer-size (IPv6
"redistribute (IPv6 RIPng)" on page 1091
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
RIPng for IPv6
Commands
RIPng Feature Overview and Configuration
RIPng)" on page 1075
RIPng)" on page 1078
RIPng)" on page 1089
RIPng)" on page 1090
Guide.
1073