Tcpdump - Allied Telesis IE340 Series Command Reference Manual

IP A P
DDRESSING AND ROTOCOL

TCPDUMP

tcpdump
Overview Use this command to start a tcpdump, which gives the same output as the
Unix-like tcpdump command to display TCP/IP traffic. Press <ctrl> + c to stop
a running tcpdump.
tcpdump <line>
Syntax
Mode Privileged Exec
Example To start a tcpdump running to capture IP packets, enter the command:
awplus#
Output Figure 22-15: Example output from the tcpdump command
Related debug ip packet interface
commands
C613-50631-01 Rev A
C
OMMANDS
Parameter
<line>
tcpdump ip
03:40:33.221337 IP 192.168.1.1 > 224.0.0.13: PIMv2, Hello, 
length: 34
1 packets captured
2 packets received by filter
0 packets dropped by kernel
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
Specify the dump options. For more information on the
options for this placeholder see
http://www.tcpdump.org/tcpdump_man.html
923