Show Diagnostic Channel-Group - Allied Telesis IE340 Series Command Reference Manual

L A C
INK GGREGATION OMMANDS
-
SHOW DIAGNOSTIC CHANNEL GROUP

show diagnostic channel-group

Overview This command displays dynamic and static channel group interface status
information. The output of this command is useful for Allied Telesis authorized
service personnel for diagnostic purposes.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show diagnostic channel-group
Syntax
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 19-2: Example output from the show diagnostic channel-group
C613-50631-01 Rev A
show diagnostic channel-group
command

awplus#show diagnostic channel-group

Channel Group Info based on NSM:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
sa3 4503
sa3 4503
po1 4601
po1 4601
po1 4601

Channel Group Info based on HSL:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
sa3 4503
po1 4601

Channel Group Info based on IPIFWD:
Note: Pos - position in hardware table
-------------------------------------------------------------
Dev Interface IfIndex
-------------------------------------------------------------
sa3 4503
po1 4601
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Member port IfIndex
port1.0.15 5015
port1.0.18 5018
port1.0.7 5007
port1.0.8 5008
port1.0.9 5009
Member port IfIndex
Member port IfIndex
"Getting Started
Guide.
Active Pos
No
No
No
No
No
Active Pos
N/a
N/a
Active Pos
N/a
N/a
797