Wait - Allied Telesis IE340 Series Command Reference Manual

S C
CRIPTING OMMANDS

WAIT

wait
Overview This command pauses execution of the active script for the specified period of
time.
wait <delay>
Syntax
Default No wait delay is specified by default.
Mode Privileged Exec (when executed from a script not directly from the command line)
Usage notes Use this command to pause script execution in an .scp (AlliedWare Plus™ script) or
an .sh (ASH script) file executed by the
an enable command, because the wait command is only executed in the
Privileged Exec mode.
Example See an .scp script file extract below that will show port counters for interface
port1.0.2 over a 10 second interval:
Related activate
commands
echo
enable (Privileged Exec mode)
C613-50631-01 Rev A
Parameter Description
<delay>
<1-65535> Specify the time delay in seconds
enable

show interface port1.0.2

wait 10

show interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
activate command. The script must contain
498