Show Vlan Access-Map - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS
-
SHOW VLAN ACCESS MAP

show vlan access-map

Overview Use this command to display information about the configured VLAN
access-maps. VLAN access-maps contain a series of ACLs and enable you to filter
traffic ingressing specified VLANs.
show vlan access-map [<name>]
Syntax
Mode User Exec/Privileged Exec
Example To display the ACLs in all access-maps, use the command:
awplus#
Output Figure 16-6: Example output from show vlan access-map
Related vlan access-map
commands
Command Version 5.4.6-2.1: command added
changes
C613-50631-01 Rev A
Parameter Description
<name>
The name of the access-map to display.
show vlan access-map
awplus#show vlan access-map 

Vlan access map : deny_all 
Hardware MAC access list 4000
10 deny any any 

Vlan access map : ip_range 
Hardware IP access list 3000
10 deny ip 192.168.1.1/24 any
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
651