A
M
C
LARM
ONITORING
OMMANDS
DEBUG ALARM
debug alarm
Overview
Use this command to enable debugging of the Alarm Monitoring feature. When
debugging is enabled, the switch displays debugging messages on the terminal
monitor and in the log.
Use the no variant of this command to disable debugging of the Alarm Monitoring
feature.
debug alarm
Syntax
no debug alarm
Default
Disabled
Mode
Global Configuration
Example
To turn on Alarm debugging, use the commands:
awplus#
awplus(config)#
Related
show debugging alarm
commands
C613-50631-01 Rev A
configure terminal
debug alarm
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
554