Show Power-Inline Interface Detail - Allied Telesis IE340 Series Command Reference Manual

P E C
OWER OVER THERNET OMMANDS
-
SHOW POWER INLINE INTERFACE DETAIL

show power-inline interface detail

Overview This command displays detailed information for one or more Power over Ethernet
(PoE) ports.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show power-inline interface [<port-list>] detail
Mode User Exec and Privileged Exec
Usage notes The power allocated to each port is listed in the Power allocated row, and is
limited by the maximum power per Powered Device (PD) class, or a user
configured power limit.
Examples To display detailed PoE port specific information for the port range port1.0.5 to
port1.0.6, use the command:
awplus#
Output Figure 20-5: Example output from show power-inline interface detail
C613-50631-01 Rev A
Parameter Description
<port-list>
Enter the PoE port(s) to display information about only the specified
port or ports.
show power-inline interface port1.0.5-port1.0.6 detail
awplus#show power-inline interface port1.0.5-1.0.6 detail

Interface port1.0.5
Powered device type: n/a
PoE admin: on
Configured Priority: Low
Actual Priority: Low
Detection status: Off
Powered pairs: Data

Interface port1.0.6
Powered device type: n/a
PoE admin: on
Configured Priority: Low
Actual Priority: Low
Detection status: Off
Powered pairs: Data
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
835