Allied Telesis IE340 Series Command Reference Manual page 871

IP A P
DDRESSING AND ROTOCOL
DEBUG IP PACKET INTERFACE
Examples To turn on ARP packet debugging on vlan2, use the command:
awplus#
To turn off IP packet interface debugging on interface vlan2, use the command:
awplus#
To turn on all packet debugging on all interfaces on the device, use the command:
awplus#
To turn off IP packet interface debugging on all interfaces, use the command:
awplus#
To turn on TCP packet debugging on vlan2 and IP address 192.168.2.4, use the
command:
awplus#
Related no debug all
commands
show debugging ip dns forwarding
tcpdump
terminal monitor
undebug ip packet interface
C613-50631-01 Rev A
C
OMMANDS
debug ip packet interface vlan2 arp
no debug ip packet interface vlan2
debug ip packet interface all
no debug ip packet interface
debug ip packet interface vlan2 address 192.168.2.4 tcp
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
871