L
C
OGGING
OMMANDS
SHOW LOG PERMANENT
show log permanent
Overview
This command displays the contents of the permanent log.
show log permanent [tail [<10-250>]]
Syntax
Usage notes
If the optional tail parameter is specified, only the latest 10 messages in the
permanent log are displayed. A numerical value can be specified after the tail
parameter to change how many of the latest messages should be displayed.
Mode
User Exec, Privileged Exec and Global Configuration
Example
To display the permanent log, use the command:
awplus#
Output
Figure 10-5: Example output from show log permanent
awplus#show log permanent
<date> <time> <facility>.<severity> <program[<pid>]>: <message>
------------------------------------------------------------------------
2014 Jun 10 09:30:09 syslog.notice syslog-ng[67]: syslog-ng starting up;
version=\'2.0rc3\'
2014 Jun 10 09:30:09 auth.warning portmap[106]: user rpc not found, reverting to
user bin
2014 Jun 10 09:30:09 cron.notice crond[116]: crond 2.3.2 dillon, started, log
level 8
2014 Jun 10 09:30:14 daemon.err snmpd[181]: /flash/.configs/snmpd.conf: line 20:
Error: bad SUBTREE object
2014 Jun 10 09:30:14 user.info HSL[192]: HSL: INFO: Registering port port1.0.1
Related
clear log permanent
commands
copy permanent-log
default log permanent
log permanent
log permanent (filter)
log permanent exclude
log permanent size
show log config
C613-50631-01 Rev A
Parameter
Description
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
show log permanent
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
492