Show Vlan Filter - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN FILTER

show vlan filter
Overview Use this command to display information about the configured VLAN filters. VLAN
filters apply access-maps (and therefore ACLs) to VLANs. This enables you to filter
traffic ingressing specified VLANs.
show vlan filter [<access-map-name>]
Syntax
Mode User Exec/Privileged Exec
Example To display information about the filter that uses the access-map named "deny_all",
use the command:
awplus#
Output Figure 16-11: Example output from show vlan filter
Related vlan access-map
commands
vlan filter
Command Version 5.4.6-2.1: command added
changes
C613-50631-01 Rev A
Parameter
<access-map-name>
show vlan filter deny_all
awplus#show vlan filter deny_all 
Vlan filter : deny_all
direction : ingress 
vlan list : 48-49
access map : deny_all
Hardware MAC access list 4000 
10 deny any any
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The name of an access-map. The command output displays
only the filters that use that access-map.
656