Pluggables And Cabling Commands; Introduction - Allied Telesis IE340 Series Command Reference Manual

8

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
and monitor Pluggables and Cabling, including:
•
•
•
For more information, see the
Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50631-01 Rev A
Pluggables and
Cabling Commands
Cable Fault Locator for finding faults in copper cabling
Optical Digital Diagnostic Monitoring (DDM) to help find fiber issues when
links go down
Active Fiber Monitoring for detecting changes in optical power received over
fiber cables.
Guide.
"clear fiber-monitoring
"clear test cable-diagnostics
"debug fiber-monitoring" on page 332
"fiber-monitoring action" on page 334
"fiber-monitoring baseline" on page 336
"fiber-monitoring enable" on page 338
"fiber-monitoring interval" on page 339
"fiber-monitoring sensitivity" on page 340
"show system fiber-monitoring" on page 342
"show system pluggable" on page 345
"show system pluggable
"show system pluggable
"show test cable-diagnostics
"test cable-diagnostics tdr
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Pluggables and Cabling Feature Overview and
interface" on page 330
tdr" on page 331
detail" on page 347
diagnostics" on page 350
tdr" on page 352
interface" on page 353
329