Ping Ipv6 - Allied Telesis IE340 Series Command Reference Manual

IP 6 C
V OMMANDS
6
PING IPV

ping ipv6

Overview This command sends a query to another IPv6 host (send Echo Request messages).
ping ipv6 {<host>|<ipv6-address>} [repeat
Syntax
{<1-2147483647>|continuous}] [size <10-1452>] [interface
<interface-list>] [timeout <1-65535>]
Mode User Exec and Privileged Exec
awplus#
Example
C613-50631-01 Rev A
Parameter
<ipv6-addr>
<hostname>
repeat
<1-2147483647>
size <10-1452>
interface
<interface-list>
timeout
<1-65535>
repeat
<1-2147483647>
continuous
size <10-1452>
timeout
<1-65535>
ping ipv6 2001:0db8::a2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
The destination IPv6 address. The IPv6 address uses the
format X:X::X:X.
The destination hostname.
Specify the number of ping packets to send.
Specify repeat count. The default is 5.
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
The interface or range of configured IP interfaces to use as the
source in the IP header of the ping packet. The interface can
be one of:
• a VLAN (e.g. vlan2)
• the loopback interface (lo)
• a continuous range of interfaces separated by a hyphen
(e.g. vlan10-20)
• a comma-separated list (e.g. vlan1,vlan10-20). Do not mix
interface types in a list.
You can only specify the interface when pinging a link local
address.
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
Specify the number of ping packets to send.
Specify repeat count. The default is 5.
Continuous ping.
The number of data bytes to send, excluding the 8 byte ICMP
header. The default is 56 (64 ICMP data bytes).
The time in seconds to wait for echo replies if the ARP entry is
present, before reporting that no reply was received. If no ARP
entry is present, it does not wait.
991