Key-String - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS
-
KEY STRING

key-string

Overview Use this command to define the password to be used by a key.
Use the no variant of this command to remove a password.
Syntax key-string <key-password>
no key-string
Mode Keychain-key Configuration
Usage Use this command to specify passwords for different keys.
In the following example, the password for key1 in the key chain named
Examples
mychain is set to password prime:
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
In the following example, the password for key1 in the key chain named
mychain is removed:
awplus#
awplus(config)#
awplus(config-keychain)#
awplus(config-keychain-key)#
Related key
commands
key chain
accept-lifetime
send-lifetime
C613-50631-01 Rev A
Parameter Description
<key-password>
A string of characters to be used as a password by the key.
configure terminal
key chain mychain
configure terminal
key chain mychain
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
key 1
key-string prime
key 1
no key-string
1050