Show Vlan Classifier Interface Group - Allied Telesis IE340 Series Command Reference Manual

VLAN C
OMMANDS

SHOW VLAN CLASSIFIER INTERFACE GROUP

show vlan classifier interface group
Overview Use this command to display information about all interfaces configured for a
VLAN group or all the groups.
show vlan classifier interface group [<1-16>]
Syntax
Mode User Exec and Privileged Exec
Usage notes If a group ID is not specified, all interfaces configured for all VLAN classifier groups
are shown. If a group ID is specified, the interfaces configured for this VLAN
classifier group are shown.
Example To display information about all interfaces configured for all VLAN groups, enter
the command:
awplus#
To display information about all interfaces configured for VLAN group 1, enter the
command:
awplus#
Output Figure 16-8: Example output from the show vlan classifier interface group
Figure 16-9: Example output from the show vlan classifier interface group 1
Related vlan classifier group
commands
show vlan classifier group interface
C613-50631-01 Rev A
Parameter Description
<1-16>
VLAN classifier interface group identifier
show vlan classifier interface group
show vlan classifier interface group 1
command
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
vlan classifier group 2 interface port1.0.3
vlan classifier group 2 interface port1.0.4
command
vlan classifier group 1 interface port1.0.1
vlan classifier group 1 interface port1.0.2
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
654