Allied Telesis IE340 Series Command Reference Manual page 611

S C
WITCHING OMMANDS
SHOW PLATFORM CLASSIFIER STATISTICS UTILIZATION BRIEF
Parameter
DHCP Snooping
Loop Detection
EPSR
CFM
G8032
Global ACLs
ACL
VACL
DOS
UFO
QoS
RA Guard
AMFAPPS
Pre-Ingress
Egress
UDB
Related show platform
commands
ipv6 access-list (named IPv6 hardware ACL)
C613-50631-01 Rev A
Description
Entries used to send DHCP and ARP packets to the CPU. User-added DHCP
Snooping filters under ACLs are counted under the ACL or QoS categories.
Entries uses to send the special loop detection frame to the CPU.
Entries used to send EPSR control traffic to the CPU.
Entries used by Connectivity Fault Management.
Entries used to send G.8032 control traffic to the CPU.
Entries for ACLs appear here if the ACLs are applied globally instead of per
switchport.
Entries for ACL filters that have been applied directly to ports using the
access-group command.
Entries for VLAN-based ACLs (ACLs that are applied to VLANs instead of ports).
Entries used for Denial of Service protection.
Entries used by Upward Forwarding Only (UFO).
Entries for ACL filters and other class-map configurations, such as policers, applied
through policy maps using the service input command.
Entries used to block IPv6 router advertisements, configured with the ipv6 nd
raguard command.
Entries used by AMF Application Proxy. These entries enable the SES Controller to
block infected ports.
Entries used for VLAN ID Translation (and also for subnet-based and MAC-based
VLAN entries on SBx81XLEM cards).
Entries used for VLAN ID Translation.
User Defined Bytes (UDB), which are a limited resource of bytes that can be used to
implement additional arbitrary matching on packet bytes on some switches. The
software manages the use and allocation of these bytes automatically. The output
of this table is intended for use by Allied Telesis Customer Support only.
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
611