Allied Telesis IE340 Series Command Reference Manual page 576

S C
WITCHING OMMANDS
( )
FLOWCONTROL SWITCH PORT
Examples To enable flow control on port1.0.2 (receive only), use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable flow control on port1.0.2 (send only), use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable flow control on port1.0.2 (receive only), use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable flow control on port1.0.2 (send only), use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related backpressure
commands
show running-config
C613-50631-01 Rev A
configure terminal
interface port1.0.2
flowcontrol receive on
configure terminal
interface port1.0.2
flowcontrol send on
configure terminal
interface port1.0.2
flowcontrol receive off
configure terminal
interface port1.0.2
flowcontrol send off
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
576