Ip Rip Send-Packet - Allied Telesis IE340 Series Command Reference Manual

RIP C
OMMANDS
-
IP RIP SEND PACKET

ip rip send-packet

Overview Use this command to enable sending RIP packets through the current interface.
Use the no variant of this command to disable this feature.
Syntax ip rip send-packet
no ip rip send-packet
Default Enabled
Mode Interface Configuration for a VLAN interface.
Example To turn on packet sending on the interface vlan2, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip rip receive-packet
commands
C613-50631-01 Rev A
configure terminal
interface vlan2
ip rip send-packet
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1044