Udld Port - Allied Telesis IE340 Series Command Reference Manual

U L D
NIDIRECTIONAL INK ETECTION

UDLD PORT

udld port
Overview Use this command to enable UDLD on an interface.This command enables UDLD
on both copper and fiber ports.
Use the no variant of this command to disable UDLD on an interface.
Syntax udld port
no udld port
Default UDLD is disabled on an interface by default.
Mode Interface Configuration
Usage notes •
•
•
Example To enable UDLD on port1.0.1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable UDLD on port1.0.1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related show udld port
commands
show udld neighbors
udld enable
udld port disable
udld reset
udld time disable-period
udld time message-interval
C613-50631-01 Rev A
(UDLD) C
OMMANDS
This command always enables the UDLD feature on a port.
The udld port disable
UDLD on an interface.
If UDLD has been set globally, using the
AlliedWare Plus ignores the no udld port command on a fiber interface.
configure terminal
interface port1.0.1
configure terminal
interface port1.0.1
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
command overwrites this command and disables
udld enable
udld port
no udld port
command, then
777