Ip Ospf Disable All - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS

IP OSPF DISABLE ALL

ip ospf disable all
Overview This command completely disables OSPF packet processing on an interface. It
overrides the
the specific interface.
Use the no variant of this command to restore OSPF packet processing on a
selected interface.
ip ospf disable all
Syntax
no ip ospf disable all
Mode Interface Configuration for a VLAN interface.
Example To disable OSPF packet processing on the VLAN interface vlan2, use the
commands:
awplus#
awplus(config)#
awplus(config-if)#
C613-50631-01 Rev A
network area command and disables the processing of packets on
configure terminal
interface vlan2
ip ospf disable all
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
1144