Show Log - Allied Telesis IE340 Series Command Reference Manual

L C
OGGING OMMANDS

SHOW LOG

show log
Overview This command displays the contents of the buffered log.
For information on filtering and saving command output, see the
with AlliedWare_Plus" Feature Overview and Configuration
Syntax show log [tail [<10-250>]]
Default By default the entire contents of the buffered log is displayed.
Mode User Exec, Privileged Exec and Global Configuration
Usage notes If the optional tail parameter is specified, only the latest 10 messages in the
buffered log are displayed. A numerical value can be specified after the tail
parameter to select how many of the latest messages should be displayed.
The show log command is only available to users at privilege level 7 and above. To
set a user's privilege level, use the command:
awplus(config)#
Examples To display the contents of the buffered log use the command:
awplus#
To display the 10 latest entries in the buffered log use the command:
awplus#
C613-50631-01 Rev A
Parameter Description
tail
Display only the latest log entries.
<10-250>
Specify the number of log entries to display.
username <name> privilege <1-15>
show log
show log tail 10
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
487