Debug Loopprot - Allied Telesis IE340 Series Command Reference Manual

S C
WITCHING OMMANDS

DEBUG LOOPPROT

debug loopprot
Overview This command enables Loop Protection debugging.
The no variant of this command disables Loop Protection debugging.
Syntax debug loopprot {info|msg|pkt|state|nsm|all}
no debug loopprot {info|msg|pkt|state|nsm|all}
Mode Privileged Exec and Global Configuration
Example To enable debug for all state transitions, use the command:
awplus#
Related show debugging loopprot
commands
undebug loopprot
C613-50631-01 Rev A
Parameter Description
info
General Loop Protection information.
msg
Received and transmitted Loop Detection Frames (LDFs).
pkt
Echo raw ASCII display of received and transmitted LDF packets to
the console.
state
Loop Protection states transitions.
nsm
Network Service Module information.
all
All debugging information.
debug loopprot state
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
571