Udld Enable - Allied Telesis IE340 Series Command Reference Manual

U L D
NIDIRECTIONAL INK ETECTION

UDLD ENABLE

udld enable
Overview Use this command to enable UDLD on all of a device's fiber-optic ports. It has no
effect on copper ports. Use the
ports.
Use the no variant of this command to disable the UDLD feature on all of a device's
fiber interfaces.
udld enable
Syntax
no udld enable
Default UDLD is disabled by default.
Mode Global Configuration
Example To enable the UDLD feature on all fiber interfaces, use the command:
awplus#
awplus(config)#
Related show udld
commands
show udld neighbors
udld aggressive-mode
udld port
udld port disable
udld reset
udld time disable-period
udld time message-interval
C613-50631-01 Rev A
(UDLD) C
OMMANDS
configure terminal
udld enable
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
udld port command to enable UDLD on copper
776