Switching Commands; Introduction - Allied Telesis IE340 Series Command Reference Manual

15

Introduction

Overview This chapter provides an alphabetical reference of commands used to configure
switching.
For more information, see the
Guide.
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50631-01 Rev A
"backpressure" on page 561
"clear loop-protection
"clear loop-protection
"clear mac address-table
"clear mac address-table
"clear port counter" on page 568
"clear port-security intrusion" on page 569
"debug loopprot" on page 571
"debug platform packet" on page 572
"duplex" on page 574
"flowcontrol (switch port)" on page 575
"linkflap action" on page 577
"loop-protection loop-detect" on page 578
"loop-protection action" on page 580
"loop-protection action-delay-time" on page 581
"loop-protection timeout" on page 582
"mac address-table acquire" on page 583
"mac address-table ageing-time" on page 584
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Switching
Commands
Switching Feature Overview and Configuration
action" on page 563
counters" on page 564
dynamic" on page 565
static" on page 567
559