Show Udld Port - Allied Telesis IE340 Series Command Reference Manual

U L D
NIDIRECTIONAL INK ETECTION

SHOW UDLD PORT

show udld port
Overview Use this command to display UDLD port status and configuration settings.
show udld port [<interface-name>] [detail]
Syntax
Mode Privileged Exec
Example To show UDLD information for all ports, use the command:
awplus#
To show detailed UDLD information for port1.0.1, use the command:
awplus#
Output Figure 18-5: Example output from show udld port
Figure 18-6: Example output from show udld port port1.0.1 detail
Related udld port
commands
udld port disable
udld enable
C613-50631-01 Rev A
(UDLD) C
OMMANDS
Parameter
<interface-name> Show UDLD information for a specified interface.
detail
show udld port
show udld port port1.0.1 detail
awplus#show udld port
Port Status
------------ -------- ---------- -----------------
port1.0.1 Enabled
port1.0.2 Disabled Normal
awplus#show udld port port1.0.1 detail
[port1.0.1]
Status : Enabled
Mode : Aggressive
Directional-State: Bidirectional
Operational-State: Advertisement - single neighbor detected

Neighbors:
Device-ID Port-ID
------------ ------------ ---------------- -----------------
0000F4272DA2 port2.0.1
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
Description
This option provides a greater level of detail.
Mode Directional-State
Aggressive Bidirectional
-
Device-Name
awplus
Directional-State
Bidirectional
774