Show Ip Ospf Border-Routers - Allied Telesis IE340 Series Command Reference Manual

OSPF C
OMMANDS
-
SHOW IP OSPF BORDER ROUTERS

show ip ospf border-routers

Overview Use this command to display the ABRs and ASBRs for all OSPF instances. Include
the process ID parameter with this command to view data about specified
instances.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ip ospf border-routers
Syntax
show ip ospf <process-id> border-routers
Mode User Exec and Privileged Exec
Examples To display the ABRs and ASBRs for all OSPF instances, use the following command:
awplus#
Output Figure 28-3: Example output from the show ip ospf border-routers command
C613-50631-01 Rev A
Parameter Description
<process-id> <0-65535> The ID of the router process for which information will
be displayed.
show ip ospf border-routers
OSPF process 1 internal Routing Table
Codes: i - Intra-area route, I - Inter-area route
i 10.15.0.1 [10] via 10.10.0.1, vlan2, ASBR, Area 0.0.0.0
i 172.16.10.1 [10] via 10.10.11.50, vlan3, ABR, ASBR, Area 
0.0.0.0
...
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
"Getting Started
Guide.
1177